advanced recording
recording a photo image on a tape -tape photo recording
•
Tape photo recording works only in Camera mode. ➥page 18
•
You can record a photo image on a tape. The photo image is recorded and will take
up a 6~7 second section of tape.
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera (
3. Press the PHOTO button.
•
"
rEC " is displayed on the LCD screen, the photo image is recorded
for about 6~7 seconds.
4. After the photo image has been recorded, the camcorder returns to its previous mode.
•
Tape Photo Recording takes about six or seven seconds, and
your camcorder returns to the standby mode. During the seven seconds,
you cannot record another photo image.
•
During the Tape Photo Recording, do not shake your camcorder.
Mosaic-pattern noise may appear on the image.
•
During the Tape Photo Recording, you can not set the following functions:
- "Visual Effect", "DIS" , "Digital Zoom", "C.Nite"
(After tape photo recording, most functions return to the previous mode.)
•
Tape Photo Recording does not work in the following situations:
- While recording movie images
- When "C.Nite" is set.
•
Your camcorder can also record photo images on a memory card. ➥page 76
•
Press PHOTO button on the remote control. Pressing the PHOTO button
on the remote control records the tape photo image with automatic focusing
(SC-D382/D385 only)
60_ English
).
PHOTO
PO W
ER
CH G
REC
SP
3 SEC
60min
16:9 Wide
10Sec
16BIt
S
No Tape !
1/50
M
29
W
T
12:00 1.JAN.2008
C.Nite 1/30
<SC-D382/D385 only>