Samsung SC-D381 User Manual page 53

CUTTINGWINDNOISE(WINDCUTPLUS)
•
The windcut plus function works in both Camera and Player (Audio dubbing)
modes. ➥page 18
•
Use the windcut plus when recording in windy places such as the beach or near
buildings.
•
The windcut plus function minimizes wind or other noises while recording.
- When the windcut plus is on, some low pitched tones are eliminated along with
the sound of the wind.
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear
4. Move the Joystick (▲ / ▼) up or down to select "Record", then press the
Joystick or move the Joystick () to the right.
5. Move the Joystick (▲ / ▼) up or down to select "WindCut Plus", then press
the Joystick.
6. To activate the windcut plus function, move the Joystick (
to select the windcut plus type, then press the Joystick.
•
"Off": Disables the function
•
"Auto": Minimizes the wind noise while preserving voices.
•
"On": Removes the low pitched wind noise.
7. To exit, press the MENU button.
•
WindCut Plus ( "On" (
Make sure windcut plus
as sensitive as possible.
) or Player (
) or "Auto" ( )) indicator is displayed.
is set to off when you want the microphone to be
).
▼ )
/ up or down
▲
CARD TAPE MODE
(SC-D383/D385 only)
BATT.
Camera Mode
Record
Rec Mode
Audio Mode
Off
WindCut Plus
Auto
Real Sterco
On
✔
Move Select Exit
MENU
0:00:30
STBY
SP
16:9 Wide
60min
10Sec
16Bit
S
C.Nite 1/30
English _45