Setting the digital image Stabilizer (diS)
•
The DIS function works only in Camera mode.
•
DIS (Digital Image Stabilizer) is a function that compensates for any shaking
or hand movement while holding the camcorder (within reasonable limits).
•
It provides more stable pictures when:
- Recording with the zoom
- Recording a small object close-up
- Recording and walking at the same time
- Recording through the window of a vehicle
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select "Camera", then press the
Joystick or move the Joystick () to the right.
5. Move the Joystick (▲ / ▼) up or down to select "DIS", then press the Joystick.
6. To activate the DIS function, move the Joystick (▲ / ▼) up or down to select "On",
then press the Joystick.
•
If you do not want to use the DIS function, set the "DIS" menu to "Off".
7. To exit, press the MENU button.
•
DIS (
) indicator is displayed.
•
EASY.Q mode automatically sets the "DIS" to "On".
•
You cannot set the following functions in the DIS mode.
: "Mosaic", "Mirror", "Emboss2", "Pastel1", "Pastel2", "C.Nite",
"Digital Zoom"
•
Setting the DIS function in 16:9 Wide mode may produce lower quality than in
normal mode.
•
It is recommended that you deactivate the DIS function when using a tripod.
•
If you use the DIS function, the picture quality may deteriorate.
page 18
➥
).
MODE
CARD
TAPE
(SC-D383/D385 only)
BATT.
Camera Mode
Camera
Program AE
Auto
�
White Balance
Auto
�
Visual Effect
Off
�
16:9 Wide
On
�
Macro
Off
�
DIS
Off
�
Move
Select
MENU
Exit
Camera Mode
Camera
Program AE
White Balance
Visual Effect
16:9 Wide
Macro
Off
DIS
On
✔
Move
Select
MENU
Exit
STBY
0:00:10
SP
60min
10Sec
16:9 Wide
16BIt
S
No Tape !
1/50
M
29
W
T
C.Nite 1/30
12:00 1.JAN.2008
English _55