recording an image From a tape aS a photo image
•
This function works only in Player mode.
•
Your camcorder can read moving image data recorded on a tape, and record it
as a photo image on a memory card.
Before operation
Insert a recorded tape and a memory card into your camcorder.
1. Set the Select switch to TAPE.
2. Press the MODE button to set Player (
3. Press the Joystick, playback the cassette.
•
The image recorded on the tape is played back.
4. Press the PHOTO button.
•
The photo image is recorded on the memory card.
•
During the time it takes to save an image, the playback screen is paused
and the OSD is displayed.
5. When you finish the recording, move down the Joystick (▼) to stop recoding
and switch the mode to M.Player for your visual reference.
•
Photo images copied from the cassette to the memory card are saved in
640x480 format.
•
Number of images you can save varies depending on the image resolution.
page 18
➥
).
page 79
➥
PHOTO
PO W
ER
CH G
0:00:16:24
STOP
SP
MIX[1+2]
60min
16BIt
S
AV In
12:00 1.JAN.2008
STOP
0:00:16:24
SP
60min
MIX[1+2]
Photo Copy
16BIt
S
Now coping...
AV In
12:00 1.JAN.2008
English _87