basic recording
RECORDINGWITHEASEFORBEGINNERS(EASYQMODE)
•
The EASY Q function works only in Camera mode. ➥page 18
•
With the EASY Q function, most of the miniDV camcorder settings are automatically adjusted, which frees you
from making detailed adjustments.
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera (
3. Press the EASY Q button.
•
When you press the EASY Q button, most functions turn off and the following
functions are set to "Auto" (DIS, Focus, White Balance, Exposure, Program AE,
Shutter)
•
The EASY Q and DIS(
4. Press the Recording start/stop button to start recording.
•
Recording will begin using the basic automatic settings.
To cancel the EASY Q mode
Press the EASY Q button again.
•
The EASY Q and DIS(
•
Almost all the settings will return to the settings that were set prior to activating
EASY Q mode.
•
You cannot cancel the EASY.Q mode during recording.
•
Menu button unavailable during EASY.Q operation
The MENU button is not available because the items are automatically set.
The "Release the Easy.Q!" messages may appear if unavailable operations
are attempted.
- MENU button
•
Taking a photo image using the PHOTO button while EASY.Q is set releases
the DIS function.
36_ English
).
) indicators appear on the screen at the same time.
) indicators disappear from the screen.
CARD
TAPE
MODE
(SC-D383/D385 only)
BATT.
OP EN
0:00:00
STBY
SP
10Sec
60min
16Bit
S
No Tape !
1/50
M
29
W
T