USing the light (light) (Sc-d382/d383/d385 only)
•
The Light function works only in Camera and M.Cam mode.
•
The Light function enables you to record a subject in a dark place without
compromising colors. For example, you can make a satisfactorily recording of
•
an outdoor gathering at night when you use this function.
1. Set the Select switch to CArD or TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera (
3. Press the MENU button.
•
The menu list will appear.
4. Move the Joystick (
▲
Joystick or move the Joystick () to the right.
5. Move the Joystick (
▲
6. Move the Joystick (
▲
•
To cancel the Light function, set the "Light" menu to "Off".
7. To exit, press the MENU button.
•
Light (
) indicator will be displayed.
•
The light can become extremely hot.
•
Do not touch it while in operation or soon after turning it off, otherwise
WArNING
serious injury may occur.
•
Do not place the camcorder into the carrying case immediately after using
the light, since it remains extremely hot for some time.
•
Do not use near flammable or explosive materials.
The range of the light is limited. (up to 2m (6.6ft))
).
/
up or down to select "Camera", then press the
▼)
/
up or down to select "Light", then press the Joystick.
▼)
/
up or down to select "On", then press the Joystick.
▼)
page 18
➥
12:00 1.JAN.2008
MODE
CARD
TAPE
(SC-D383/D385 only)
BATT.
Camera Mode
Camera
Auto
Program AE
�
Auto
White Balance
�
Off
Visual Effect
�
On
16:9 Wide
�
Off
Macro
�
DIS
Off
�
Move
Select
MENU
Exit
Camera Mode
Camera
BLC
Digital Zoom
C.Nite
Light
Off
On
✔
Move
Select
MENU
Exit
STBY
0:00:10
SP
16:9 Wide
60min
10Sec
16:9 Wide
16BIt
S
No Tape !
1/50
M
29
W
T
C.Nite 1/30
English _59