Monthly % Adjust - Weathermatic PROLINE PL800 Owner's Manual

www.weathermatic.com
program until the blackout period has expired. Scrolling
the beginning time (forward arrow) between 12:00 am and
11:50 pm causes NONE SET to appear and clears the omit
time.
If you want to omit a specific day or days each week from
watering schedules, select OMIT:DAYS with the  and 
arrow buttons. Then push NEXT. Display will show a day
of the week with Omit or Allow flashing. Use  and 
arrow buttons to select Omit or Allow. Use NEXT or BACK
to scroll between days of the week. Omitted days will be
visible at the top of the display. Any running user program
will be stopped at midnight in order to honor omit days or
dates. Programs scheduled to start on an omit day will be
skipped.
If you want to omit specific dates during the year, select
OMIT: DATES. Then push NEXT. Enter the month and date.
Push NEXT to enter up to 15 dates. Scrolling the month
value between 12 and 1 causes mm/dd to appear and
clears the omitted date. Any running user program will be
stopped at midnight in order to honor omit days or dates.

3.6 Monthly % Adjust

(Optional)
The Monthly % Adjust
feature allows the user to
modify zone run times by
program for each month
to easily adjust watering
for seasonal climate changes. The time programmed for
each zone in ZONE RUN TIMES is always the value for
the 100% setting in Monthly % Adjust. When you use the
Monthly % Adjust, you are increasing or decreasing the
100% time value.
% settings in this mode are 0 to 300% in 5% increments.
Use  and  arrow buttons to select % desired. Press
PGM to choose program.
PROGRAMMING IS COMPLETE. RETURN THE DIAL TO
THE RUN POSITION.
8
Programming 3.0