Omit Times/Days/Dates; Seasonal % Adjust - Weathermatic smartline SL800 Owner's Manual

8
3.6 Omit Times/Days/Dates (Optional)
The omit settings are used
to set a watering blackout
period. For example, if you
live in a municipality that
restricts outdoor watering
between 10:00 am and 6:00
pm, you can blackout that
time period. If a watering
program in progress is paused
for a blackout period, the
ORANGE LED will display during the pause. The watering cycle
will automatically resume at the end of the blackout period. Use
the UP and DOWN buttons to select OMIT:TIME, OMIT:DAYS,
and OMIT:DATES. You may choose any or all of these omit
options.
If you want a watering blackout for the same period each
day, select OMIT:TIME. Then push NEXT. A forward (>) arrow
indicates the beginning time for the blackout. Use UP and
DOWN buttons to set beginning time. Then push NEXT. A
reverse arrow (<) indicates the end time for the blackout. Use
UP and DOWN buttons to set ending time. The OMIT:TIME
function will pause any active watering program until the
blackout period has expired. Scrolling the beginning time
(forward arrow) between 12:00 am and 11:50 pm causes NONE
SET to appear and clears the omit time.
If you want to omit a specific day or days each week from
watering schedules, select OMIT:DAYS with the UP and DOWN
buttons. Then push NEXT. Display will show a day of the week
with Omit or Allow flashing. Use UP and DOWN buttons to
select Omit or Allow. Use NEXT or BACK to scroll between
days of the week. Omitted days will be visible at the top of the
http://support.weathermatic.com
display. Any running user program will be stopped at midnight
in order to honor omit days or dates. Programs scheduled to
start on an omit day will be skipped.
If you want to omit specific dates during the year, select OMIT:
DATES. Then push NEXT. Enter the month and date. Push NEXT
to enter up to 15 dates. Scrolling the month value between 12
and 1 causes mm/dd to appear and clears the omitted date/s.
Any running user program will be stopped at midnight in order
to honor omit days or dates.
OMIT TIMES / DAYS
3.7 Seasonal % Adjust (Optional)
The Seasonal % Adjust feature
allows the user to modify
zone run times by program
for each month to easily
adjust watering for seasonal
climate changes. The time
programmed for each zone in
ZONE RUN TIMES is always
the value for the 100% setting
in Seasonal % Adjust. When
you use the Seasonal %
Adjust, you are increasing or decreasing the 100% time value.
% settings in this mode are 0 to 300% in 5% increments. Use UP
and DOWN buttons to select % desired. Press PGM to choose
program.
PROGRAMMING
IS COMPLETE.
RETURN THE
DIAL TO THE RUN
POSITION.
Programming 3.0

SEASONAL % ADJUST

Note: When the SmartLine®
controller is in SMART
mode this feature is voided.
SMART mode will change
zone watering times daily.