Seasonal % Adjust - Weathermatic SmartLine SL800 Owner's Manual

3.0 Programming for Standard Watering Mode
arrow buttons. Then push NEXT. Display will show a day of the
week with Omit or Allow flashing. Use ▲ and ▼ arrow buttons
to select Omit or Allow. Use NEXT or BACK to scroll between
days of the week. Omitted days will be visible at the top of the
display. Any running user program will be stopped at midnight
in order to honor omit days or dates. Programs scheduled to
start on an omit day will be skipped.
If you want to omit specific dates during the year, select OMIT:
DATES. Then push NEXT. Enter the month and date. Push NEXT
to enter up to 7 dates. Scrolling the month value between 12
and 1 causes mm/dd to appear and clears the omitted date.
Any running user program will be stopped at midnight in order
to honor omit days or dates.

3.6 Seasonal % Adjust

(Optional)
The Seasonal % Adjust fea-
ture allows the user to modify
zone run times by program
for each month to easily
adjust watering for seasonal
climate changes. The time
programmed for each zone
in SET ZONE RUN TIMES
is always the value for the
100% setting in Seasonal %
Adjust. When you use the
Seasonal % Adjust, you are
increasing or decreasing the
Note: The sea-
sonal percent
adjust is inac-
tivated during
Auto Adjust watering.
100% time value.
% settings in this mode are 0 to 300% in 5% increments. Use
▲ and ▼ arrow buttons to select % desired. Press PGM to
choose program.
THIS COMPLETES PROGRAMMING FOR STANDARD
WATERING MODE. RETURN THE DIAL TO THE RUN
POSITION.
9