Advertisement
If you have a problem, question,
or request, call your local dealer,
or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people
who want to help you.
(Outside the U.S.A., Canada,
Mexico, Puerto Rico, and the
U.S. Virgin Islands, call:
1.616.247.2500)
Or visit our website
www.steelcase.com
©
1998 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
4900 Series Tables
3/4" Socket
3/4" Wrench
1
of
3
939500508 Rev A
Advertisement
Table of Contents
Related Manuals for Steelcase 4900 Series
Summary of Contents for Steelcase 4900 Series
- Page 1 4900 Series Tables If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. 3/4" Socket (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
- Page 2 SHIPPING BOLT NOTE: Bases with (2) arms are installed in the same manner. Large tables: 2-3/4” dia. outer tube cover. Small Tables 2-1/4” dia. outer tube BASE cover. Preparation For Assembly. TABLE TOP Lay shipping carton or other soft material on floor. Turn table top upside down on protective material, exposing pedestal mount and base.
- Page 3 Base To Outer Cover Installation. Large Tables: Turn base upside down and guide four arms into four mating slots in outer cover tube. To properly engage tabs on hub slowly rotate the base until tabs drop into slots in inner tube. Small Tables: Guide arms into mating slots in outer cover tube HUB TABS...
Need help?
Do you have a question about the 4900 Series and is the answer not in the manual?
Questions and answers