Battery Replacement - NIPRO Diagnostics True Metrix Pro Manual

TRUE METRIX PRO System Comprehensive Resource Guide (GDH-FAD Enzyme)
®

Battery Replacement

Battery Replacement
A low battery displays Battery Symbol while continuing to
function. A dead battery displays Battery Symbol, beeps,
and then turns off. To replace battery:
1. Lift tab on Battery Door.
2. Turn meter over, while holding meter in one hand with
Battery Door facing down, tap gently on the palm of
Low
your other hand to loosen and remove battery.
3. Discard the old battery in an appropriate container.
Tab
4. Insert new battery with positive ("+") side facing up.
Close Battery Door.
Battery
Door
5. Press " • " Button to turn meter on and check time,
date, and Testing Alerts and Reminders (see Meter Set
Up). If meter does not turn on, check that battery was
installed properly. If not, remove and reinsert battery
and turn meter on by pressing " • " Button. Call for
assistance if problem persists.
Battery might explode if mishandled or
incorrectly replaced. Do not dispose of
battery in fire. Do not take apart or attempt
to recharge battery. Dispose according to
local regulations.
Battery is not rechargeable. If you have a
cable or a cradle for downloading results
to a computer, DO NOT plug the USB cable
end into an electrical outlet. Trying to
recharge the battery or power the meter by
plugging into an electrical outlet will cause
meter to catch on fire or melt.
Battery Replacement 31