Installing Replacing And Charging; Batteries - Opticon PHL1300 User Manual

2.5 INSTALLING, REPLACING
AND CHARGING BATTERIES
Wrong use of batteries might cause
serious damage
to the terminal or to the cradle.
In order to avoid damage
it is very important to take notice
of the instructions.
!
Insert full batteries before use of the
terminal.
!
Never remove the main battery pack
while the terminal is turned on.
Doing so can cause data in the terminal
to be deleted.
!
Never change the main battery pack
while the backup battery is out.
Doing so can crash the application.
!
When you do not use the terminal for
a long time, make sure the main
battery has enough capacity.
When there is not enough capacity in the
main battery the backup battery can not
be charged and will become too low.
U ' PHL1300
SER S MANUAL
!
Only use recommended batteries.
When other batteries are used, defects or
other problems can occur. Before installing
(new) batteries, please make sure you are
using the recommended batteries.
!
Do not make a mistake regarding the
polarity (+ , -) of the battery.
The terminal will not work when the
polarity is incorrect.
!
Use the right charger for batteries
The rechargeable Li-Ion battery pack of
Opticon can be charged in the cradle
IRU1300 when it is in the terminal.
Other rechargeable batteries need to be
recharged in a separate battery charging
device.
!
Follow the instructions for installing,
changing and removing the batteries
very strictly.
The products are not warranted for
damage, defects, malfunction or loss of
data, resulting from incorrect use of

batteries.

/ IRU1300
TERMINAL CRADLE
11