Table of Contents
Advertisement
U
'
PHL1300
SER
S MANUAL
2.4 ASSEMBLY
Follow the next steps to make your terminal
ready for installation in a system, that is
described further in the manual.
2.4.1. Terminal
To avoid drop use the hand strap.
Fix the small cord of the strap around the
pillar of the terminal (ref. 1)
Insert the handle of the strap in the thin
loop (ref. 2)
The strap is fixed to the terminal (ref. 3)
Hold the handstrap around the wrist when
carrying the terminal (ref. 4)
!
Do not swing the terminal around.
1
3
Start with a full battery
To be sure of proper operation, it is
advised to start with a full battery,
charge the battery pack according to the
instructions in the next chapter.
Click the battery pack into the terminal,
as instructed in the next chapter.
10
/ IRU1300
TERMINAL
CRADLE
2
4
2.4.2 Cradle
Place for mounting
Place the cradle in normal office
conditions.
Avoid a place under strong light.
Otherwise IrDA communication may be
disturbed.
Power Connection
Attach the DC jack of the AC adapter
into the socket of the cradle.
Then connect the AC adapter to the
mains outlet
When the terminal PHL1300 with the
rechargeable battery pack is placed in
the cradle, the LED on the cradle turns
green.
When the terminal PHL1300 with
penlite batteries is placed in the cradle, no
indication is given by the cradle.
2.4.3. Terminal on cradle
Take notice that the IRU1300 cradle is designed
for the PHL1300 terminal. No other types of
terminals can be placed into this cradle.
Advertisement
Table of Contents
