TouchTunes ANGELINA Installation And Setup Manual

TouchTunes ANGELINA Installation And Setup Manual

Hide thumbs Also See for ANGELINA:
Table of Contents

Advertisement

Installation and Setup Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ANGELINA and is the answer not in the manual?

Questions and answers

Summary of Contents for TouchTunes ANGELINA

  • Page 1 Installation and Setup Guide...
  • Page 3 Guide. • TouchTunes will not be held liable for any damages resulting from the use of this Guide or the product(s) described in this Guide. TOUCHTUNES PROVIDES NO WARRANTY WITH REGARD TO THIS GUIDE OR ANY OTHER...
  • Page 4 TouchTunes' copyrighted material. Intellectual Property All Intellectual Property (as defined below) owned by or which is otherwise the property of TouchTunes or its respective suppliers or licensors relating to Angelina, including accessories, parts or software relating thereto (the "Product"), is proprietary to TouchTunes and protected under Federal and State laws and international treaty provisions.
  • Page 5: Table Of Contents

    Angelina Interior Components ........
  • Page 6 Installing the Hard Drive ............45 Connecting Angelina to the Wired Broadband Network ......47 Setting up TouchTunes Wireless Broadband (Optional) .
  • Page 7 List of Angelina Field Replacement Unit (FRU) Kits ....... . .
  • Page 9: Welcome

    Welcome This section introduces the newest TouchTunes jukebox, Angelina, provides important safety information, and describes how to get technical support. Topics Welcome About This Guide Disclaimer and Important Safety Information Contacting TouchTunes Angelina Installation and Setup Guide 901029-001 Rev 01...
  • Page 10: Welcome

    Welcome Welcome Congratulations on your receipt of Angelina. Angelina’s concept and appearance are designed to impress as well as attract patrons. About This Guide This guide is intended for Operators of TouchTunes Angelina digital jukeboxes and their technicians, as well as TouchTunes technical support and field service personnel.
  • Page 11 POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE. THE MAINS PLUG OF THE POWER SUPPLY CORD OR APPLIANCE COUPLER SHALL REMAIN READILY ACCESSIBLE. The Power Supply has no serviceable parts inside, please contact TouchTunes Customer Support for service. Clean only with dry cloth.
  • Page 12: Contacting Touchtunes

    Contacting TouchTunes If you need help or have questions about this guide, call the TouchTunes 24/7 Service Hotline at 888-338-5853. To help us assist you more effectively with problem reports, the following information may be required when contacting TouchTunes Technical Support: •...
  • Page 13: Introducing Angelina

    Introducing Angelina This section introduces the exterior, interior, and software features of the Angelina jukebox. Topics Introducing Angelina User Interface - Play More! • Visualizer Angelina Features Overview • Custom Music Programming (CMP) Angelina Interior Components • Multi-Language Support •...
  • Page 14: Introducing Angelina

    Introducing Angelina TouchTunes introduces a revolutionary next-generation entertainment platform, with features designed to enhance the customer experience and attract patrons. Angelina is more than just a jukebox. Angelina is a multimedia entertainment platform that enhances patrons’ entertainment experience. Angelina Installation and Setup Guide...
  • Page 15: Angelina Features Overview

    Introducing Angelina Angelina Features Overview Angelina Features Overview External Features Angelina Installation and Setup Guide...
  • Page 16: Touchscreen Display

    A third independently controllable zone can be used with external amplification. The amplifiers can be swapped out individually, when needed. Fan-less Design Angelina’s cooling system is an industrial design that uses passive cooling, which greatly reduces noise and makes it a “green” out-of-home entertainment platform. Powerful CPU Angelina’s advanced 64-bit CPU provides great performance and graphics superior than any previous TouchTunes...
  • Page 17: Redesigned Mounting Bracket

    Angelina Features Overview Redesigned Mounting Bracket Angelina cannot be mounted on the same wall bracket used by any other TouchTunes jukebox. It has a new auto- locking design and its dimensions are specific for supporting Angelina. Similarly, Angelina’s mounting bracket cannot be used for any other TouchTunes jukebox.
  • Page 18: Angelina Interior Components

    Introducing Angelina Angelina Interior Components Angelina Interior Components The following figure shows the interior of the Angelina jukebox (US payment model). Angelina Installation and Setup Guide...
  • Page 19 Introducing Angelina Angelina Interior Components The following figure shows the components on Angelina’s Modular Hardware Platform. Computer I/O Board Power supply unit Zone 2 amplifier Zone 1 amplifier Angelina Installation and Setup Guide...
  • Page 20: Computer

    Angelina Interior Components Computer The central computer in the Angelina jukebox is a specially designed computer mounted inside Angelina that runs the unit. The computer contains a 500 gigabyte SATA hard drive and connectors for attaching peripherals. Angelina Installation and Setup Guide...
  • Page 21: I/O Board

    HDMI out Ethernet (LAN port) USB 3.0 ports (5) I/O Board The I/O Board is an interface between the computer and Angelina’s other components, providing controls and status indicators. Wired remote (top of panel) Squid (main) Zones 1 through 3 audio...
  • Page 22: Amplifiers

    Handle for easy removal of component Amplifiers Angelina’s two amplifiers are specially-designed with integrated power supply and each provides an independently controllable audio zone. Each amplifier has a handle that provides an easy way to remove the component when needed. The following shows the Zone 2 amplifier.
  • Page 23: Remote Control

    200 feet depending on the obstructions between it and the unit. A rubber sleeve (P/N 401483-001), which makes the remote more water resistant, is available for order from TouchTunes, at an additional cost. Angelina also supports a wired remote control, which is available as an option, at an additional cost. Payment Means The standard configuration for the US payment model of Angelina is: •...
  • Page 24 Hook and loop, one-wrap cable ties These reusable hook and loop cable ties are easy to take on and off and require no tools. Cable ties stickers (P/N 900490-0010) are available for order from TouchTunes, at an additional cost. Angelina Installation and Setup Guide...
  • Page 25: User Interface - Play More

    User Interface - Play More! User Interface - Play More! Angelina’s user interface has an inviting layout that presents patrons with an attractive, entertaining, and user-friendly experience that invites them to Play More! Evolving from TouchTunes’ state of the art Jukebox Software architecture, the OpenStage 2 software platform comprises a user interface that includes the following features: •...
  • Page 26: Visualizer

    Setting the Visualizer display pattern and colors is done in the Operator interface. Angelina Installation and Setup Guide...
  • Page 27: Custom Music Programming (Cmp)

    The UI always resets to the default language when a new session starts. To configure the language options, in the Operator interface, select a default language from SOFTWARE > Languages and reboot Angelina. For instructions on how to change the language options, see Changing Languages.
  • Page 28 Introducing Angelina User Interface - Play More! Angelina Installation and Setup Guide...
  • Page 29: Preparing For Installation

    Preparing for Installation This chapter explains how to prepare to install an Angelina jukebox for a location, including checking Angelina components and setting up communications connections. Topics Checking Angelina Components Setting Up a Broadband Connection Preparing Tools and Materials for Installation...
  • Page 30: Checking Angelina Components

    Checking Angelina Components Checking Angelina Components Angelina is delivered along hardware components and an Accessory kit. The hard drive (necessary for Angelina to function) is shipped with Angelina, but in separate packaging. Before you install Angelina, ensure that you have received all hardware components and that both the hardware components and the items in the kit are in good condition.
  • Page 31 Preparing for Installation Checking Angelina Components Angelina dimensions Angelina Installation and Setup Guide...
  • Page 32: Setting Up A Broadband Connection

    901029-001 Guide (this guide) 3. The wall bracket comes in its own package and is included with Angelina (FRU Kit P/N 600260-001). Verify that the wall bracket package is included with Angelina and is in good condition. 4. Check the condition of the hardware components in the Accessory kit items to ensure they are in good condition.
  • Page 33: Preparing Tools And Materials For Installation

    Internet access before you can set up a broadband connection for the jukebox. Preparing Tools and Materials for Installation You require the following tools and materials to install Angelina. Ensure that you have all items at hand before beginning the installation. •...
  • Page 34 Preparing for Installation Preparing Tools and Materials for Installation Angelina Installation and Setup Guide...
  • Page 35: Installing Angelina

    Installing Angelina This chapter explains how to install Angelina, including setting up its hardware and connecting it to a broadband network. Topics Moving Angelina to its Mounting Location Unpacking Angelina Wall-Mounting Angelina Installing the Hard Drive Connecting Angelina to the Wired Broadband Network...
  • Page 36: Moving Angelina To Its Mounting Location

    Unpacking Angelina In this section, you remove Angelina from its packaging in preparation to wall mount the jukebox. 1. Remove the top cover. 2. Remove the wall bracket package and set it aside for the next procedure.
  • Page 37 Wall bracket package Accessory kit Packaging elements 4. Remove the top halves of the foam packaging. 5. Open the top of the bag protecting Angelina and pull down until the back of the jukebox is fully uncovered. Angelina Installation and Setup Guide...
  • Page 38: Wall-Mounting Angelina

    Wall-Mounting Angelina Wall-Mounting Angelina In this section, you install Angelina, level it so it is stable and then open its case to access internal components. IMPORTANT: TouchTunes has conducted extensive ergonomic studies to determine the optimal viewing height, viewing angle, and relaxed sight range for wall-mounting Angelina.
  • Page 39 Using the spirit level located on the top of the bracket, ensure that the bracket is level, then fasten it to the wall using screws and washers according to your local regulations ensuring that the wall bracket will be able to support Angelina’s weight (88 lbs. [40 kg]). See the following figure for an example configuration of screws and washers.
  • Page 40 NOTE The jukebox’s connection to the AC mains was designed for a detachable AC cable (C13 to 5-15P). Refer to your local electrical code for correct installation. Angelina Installation and Setup Guide...
  • Page 41 CAUTION: The Angelina jukebox can cause injury if lifted incorrectly or by a single individual. TouchTunes strongly advises that two people perform the following steps. 8. Using at least two people, lift the Angelina jukebox so that the top of the unit is slightly higher than the top of the wall bracket.
  • Page 42 Installing Angelina Wall-Mounting Angelina 9. Align the receptacles (highlighted in red below) on Angelina with the flange hooks on the wall bracket ensuring that the pivot latches on the bottom of the wall bracket also align with the corresponding openings (highlighted in green below) on the back of the jukebox.
  • Page 43 11. Locate the keys for Angelina. A new Angelina jukebox is shipped with two keys. 12. Unlock Angelina from the lock on the right side of the unit and then slowly swing open the Angelina door. Take care when the door is open as it is heavy and can pull down the jukebox until it has been secured to the wall in the next step.
  • Page 44 Installing Angelina Wall-Mounting Angelina 13. Turn the wall bracket pivot latches to the vertical (locked) position to completely secure the Angelina jukebox to the wall bracket. The location of the pivot latches are circled in red in the following figure.
  • Page 45: Installing The Hard Drive

    14. Pull the speaker and network cables through the access hole to connect inside the jukebox. Installing the Hard Drive Before you install the hard drive, familiarize yourself with the layout of the central computer in Angelina. See to identify the components and connections on the computer for Angelina.
  • Page 46 Installing the Hard Drive 4. Locate the hard drive for Angelina. The hard drive for a TouchTunes Angelina jukebox is contained in an enclosure. The hard drive and its enclosure are shipped separately from the main Angelina hardware. If the hard drive has not yet arrived at the location, contact TouchTunes or your distributor.
  • Page 47: Connecting Angelina To The Wired Broadband Network

    Do not over-tighten. WARNING: Do not, under any circumstances, attempt to force the wrong type of hard drive into the HD slot of the Angelina computer. By doing so, you risk serious damage to the hard drive and the computer.
  • Page 48: Setting Up Touchtunes Wireless Broadband (Optional)

    The TouchTunes Wireless Broadband hardware kit (part number [P/N] 600263-001) contains everything you will need to provide your Angelina jukebox with a wireless broadband Internet connection. This kit comes with its own installation guide (Wireless Broadband Installation Guide (AT&T Beam) P/N 901024-001) that will guide US operators through the proper steps for setting up a wireless broadband connection.
  • Page 49: Connecting Speakers To Angelina

    Connecting Speakers to Angelina Connecting Speakers to Angelina To connect external speakers to Angelina’s amplifier, you must use the 4-pin Euroblock connector (P/N 100000-001). WARNING: The speaker output of this unit can exceed 10 Watts and could cause a shock injury. Connection to speakers should be performed by a skilled person in compliance with local building codes.
  • Page 50 6. Attach the Euroblock connector to the connector on the Zone 1 or Zone 2 amplifier. 7. Route the free end of the cables out of Angelina through the cable channel. 8. Connect the other end of the cables to the speakers.
  • Page 51: Connecting Power To Angelina

    1. Ensure that the AC power cord from the Power Supply Unit (PSU) is plugged into the power strip. 2. Run Angelina’s AC power cord through the right cable channel, then connect its female end to the socket on the Power Bar, just below the rocker switch.
  • Page 52 Installing Angelina Activating the Angelina Screen Angelina Installation and Setup Guide...
  • Page 53: Activating Angelina

    Activating Angelina This section describes how to activate Angelina after you have completed the hardware installation. Topics Powering on Angelina Configuring Angelina • Calibrating the Touchscreen • Selecting Configuration Settings • Selecting Languages • Choosing Angelina Settings • Choosing Calling Window and Connection Type •...
  • Page 54: Powering On Angelina

    Angelina is starting the initialization process. Configuring Angelina After Angelina is initialized, the Calibration screen appears. NOTE If there is a corruption in Angelina’s ID chip or other serious error, the Calibration screen does not appear and an error message appears. See Serious System Error.
  • Page 55: Selecting Configuration Settings

    Selecting Configuration Settings On the Settings screen, you select the source for settings. Settings include mixer levels, credit rules, the remote ID, and the other configurable options available from the Operator interface or from the TouchTunes Tempo site (https:/ /tempo.touchtunes.com).
  • Page 56: Selecting Languages

    Languages screen After the initial setup, you can change the languages at any time. To change the language options, in the Operator interface, select a default language from Software > Languages and reboot Angelina. NOTE Language options apply only to the user interface. English is used for the Operator interface menus.
  • Page 57: Choosing Angelina Settings

    1. Touch one of these selections. NOTE On new Angelina jukeboxes, the only option available is the first one displayed. The others are for cases where the hard drive has been replaced, such as when migrating from previous-generation software. If an option is not available, it is grayed out and cannot be selected.
  • Page 58: Choosing Calling Window And Connection Type

    Choosing Calling Window and Connection Type After you choose the Angelina settings, the Calling window and Connection type screen appears. From here you select the nightly time range during which the jukebox communicates with the TouchTunes server and the type of connection the jukebox uses.
  • Page 59 With the Connection type controls, you choose the type of network connection for the jukebox. Depending on your selection, different settings appear in the lower area of the screen, enabling you to set the connection parameters. Angelina Installation and Setup Guide...
  • Page 60 5. Enter the Gateway, DNS-1, DNS-2, and Netmask information supplied by the ISP by using the associated Config buttons and numeric keypad windows. 6. After you enter information in all the required fields, touch Proceed to validation at the upper right-hand area of the Calling window and Connection type screen. Angelina Installation and Setup Guide...
  • Page 61: Verifying The Configuration

    Verifying the Configuration 1. Watch the progress on the Communication screen. The Communication screen shows the progress of the jukebox as it communicates with the TouchTunes server. The network status LEDs display each communication step, with corresponding information in the Activity messages.
  • Page 62 TouchTunes Tempo site on the TouchTunes server, data access can be offline. In this case, the jukebox can still receive new music, but any settings you make for it through the TouchTunes Tempo site are not registered on the jukebox until data access is restored.
  • Page 63: Updating Software

    Activating Angelina Updating Software Updating Software After you activate Angelina, TouchTunes recommends that you make sure that Angelina has the most up-to-date software. 1. Locate the Manager (MNGR) button on the I/O Board. Manager button on I/O Board Angelina Installation and Setup Guide...
  • Page 64 Activating Angelina Updating Software 2. Press and release the MNGR button. The Operator interface main menu appears. Operator interface main menu 3. On the main menu, press the DIAGNOSTIC button. Diagnostic menu - Network status screen Angelina Installation and Setup Guide...
  • Page 65: Installation Errors

    Activating Angelina Installation Errors 4. Touch the Call now button at the bottom of the menu. Angelina communicates with the TouchTunes server and downloads the most recent software build. Installation Errors During installation, errors can occur if there is damage to the jukebox hardware or corruption to its software. This is rare under normal circumstances.
  • Page 66 Activating Angelina Installation Errors Angelina Installation and Setup Guide...
  • Page 67: Setting Up Angelina

    Setting up Angelina This section describes how to set up Angelina after you complete the hardware installation and software activation. Topics Opening the Operator Interface Setting Up the Remote Control Configuring the Bill Acceptors Testing the Payment Acceptors Enabling Bass Boost...
  • Page 68: Opening The Operator Interface

    Opening the Operator Interface 1. On the I/O Board, press and release the Manager (MNGR) button to display the Operator interface. A call-out to the Manager button is shown in the Updating Software section. Operator interface Angelina Installation and Setup Guide...
  • Page 69: Setting Up The Remote Control

    Setting up Angelina Setting Up the Remote Control Setting Up the Remote Control The TouchTunes wireless remote control is a single-frequency remote that transmits a 433.92 MHz (FSK) signal. The red indicator LED flashes when the remote transmits or is being programmed.
  • Page 70: Setting The Remote Control Id

    3. The red indicator light lights up for three seconds to confirm your selection. If you enter an invalid code, the light blinks five times. 4. You must now make the jukebox learn the remote ID. Go to Learning the Remote Angelina Installation and Setup Guide...
  • Page 71: Learning The Remote Id

    3. Watch the display. When prompted, press the MIC VOL up () key on the remote control. The display shows a confirmation message and returns to the Options screen. MIC VOL prompt 4. Test the remote by raising and lowering the jukebox volume as it is playing. Angelina Installation and Setup Guide...
  • Page 72: Remote Key Assignments And Functionality

    VOLUME ZONE 1, 2, 3 Raises and lowers the volume of the selected zone within the limits set on the Sound Mixer screen. F1, F2, F3, F4 For future use. Left-arrow, right-arrow, OK For future use. Angelina Installation and Setup Guide...
  • Page 73: Configuring The Bill Acceptors

    1. On the Operator interface, open the HARDWARE > Options screen. Hardware Options screen From this menu, you can configure Angelina to use two bill acceptors or one. By default, this option is turned ON. • If Angelina has a single bill acceptor, you must turn this option OFF.
  • Page 74: Testing The Payment Acceptors

    Testing the coin acceptor applies to the Canadian model only. 1. Open the Operator interface. 2. Select the MONEY menu and then press the Options button. The Money > Options screen appears. Money Options screen Angelina Installation and Setup Guide...
  • Page 75 $1, $5, $10, and $20 bills • four-way bill direction • high security bill acceptance • long pulse (do not change this setting) To change the settings, follow the directions on the side of the bill acceptor stacker. Angelina Installation and Setup Guide...
  • Page 76: Enabling Bass Boost

    The screen refreshes, showing the value of the coin inserted. Enabling Bass Boost Angelina’s computer boasts DSP technology for improved audio quality, equalization, and noise reduction. The Bass Boost feature — individually controllable for all 3 audio zones — is by default turned off in the jukebox software and must be turned on through the Operator interface.
  • Page 77: Connecting An External Audio Source

    Connecting an External Audio Source Angelina can accept input from an external audio device as long as the device has a line level stereo output (from 300mV to 1 V RMS). Most audio devices, such as tape decks, receivers, CD players, or radios have such an output.
  • Page 78 Connecting an External Audio Source To connect an external audio source to Angelina: To connect an external audio source to Angelina, use a line-input DI box (P/N 700167-001). Refer to the following figure when performing this procedure. External audio connections 1.
  • Page 79: Connecting A Microphone

    A quick way to solve the problem is to install a ground loop isolator on the audio cable that connects Angelina to the external audio device. Connecting a Microphone A microphone can be connected to Angelina. Angelina automatically mutes the song that is currently playing when the talk button on the microphone is activated. Microphone Requirements...
  • Page 80 To connect a microphone to Angelina: To connect a microphone to Angelina, you must use the MIC box (P/N 700166-001) and the 4-pin Euroblock connector (P/N 100000-001) supplied with the microphone kit (sold separately). Refer to the following figure when performing this procedure.
  • Page 81 9. Open either of the cable access ports on the rear of Angelina. 10. Route the cable through the cable channel on the rear of the cabinet and then into Angelina. 11. Plug the other end of the Cat 5 cable into the port labeled MIC IN on the I/O Board.
  • Page 82 Mixer Input screen NOTE The Mixer Input screen includes a MICROPHONE BOOST section, which is independently controllable for the three audio zones. The default value is OFF. Adjust your microphone gain and boost settings as needed. Angelina Installation and Setup Guide...
  • Page 83: Adjusting Touchscreen Brightness And Contrast

    Angelina’s touchscreen is equipped with On Screen Display (OSD) controls that let you change settings. Located on the back of the monitor are five buttons.
  • Page 84: Applying Filters And Credit Rules

    NOTE If you are replacing an older TouchTunes jukebox with an Angelina jukebox, you must manually apply any music filters and credit rules from the old jukebox to Angelina if you want such filters and rules to apply to Angelina.
  • Page 85: Setting Lightshow Colors And Brightness

    Setting Lightshow Colors and Brightness Setting Lightshow Colors and Brightness The color and brightness of Angelina’s front panel, wall wash, and Visualizer can be changed to better match a location’s color scheme and lighting (or branding). The settings associated with this functionality can be found within the Operator interface by navigating to HARDWARE >...
  • Page 86 Setting up Angelina Setting Lightshow Colors and Brightness From this screen, you can set the Visualizer color and color span. Setting Visualizer Color and Color Span Angelina Installation and Setup Guide...
  • Page 87 Set the wall wash animation to “PULSE” or “FIXED” • Specify for the wall wash to match the colors set for the Visualizer • Specify the wall wash color (when MATCH VISUALIZER COLORS is set to “OFF”) Wall Wash settings Angelina Installation and Setup Guide...
  • Page 88: Setting Local Favorites Options

    Setting up Angelina Setting Local Favorites Options Setting Local Favorites Options You can change the default view and sorting order of the Favorites from the Operator interface on the MUSIC > Options screen. Setting Local Favorites Angelina Installation and Setup Guide...
  • Page 89: Setting Custom Music Programming (Cmp) Levels

    Setting CMP levels Changing Languages When you activated Angelina, you selected a default language, but you can change your language selection any time. To change the language options, on the Operator interface, select a default language from SOFTWARE > Languages and then reboot Angelina.
  • Page 90: Note About Applying Stickers To The Angelina Touchscreen

    Angelina facade. You can professionally display the location and your contact information on the Angelina screen by adding it to the Owner profile page and enabling the Owner Profile page to display from Angelina’s Operator interface under SOFTWARE >...
  • Page 91: Service And Maintenance

    Service and Maintenance This section has information to assist you with the service and maintenance of Angelina. Topics Important Safety Instructions and Warranty Information About Angelina Maintenance List of Angelina Field Replacement Unit (FRU) Kits Offline Diagnostic Tool • Starting the ODT •...
  • Page 92: Important Safety Instructions And Warranty Information

    In the next section, you will find a list of all the available FRUs you can purchase, and the associated document that shows you how to perform the procedure. All the listed documents are available for download from the TouchTunes Tempo site (https://tempo.touchtunes.com), making it possible to consult them before purchasing a FRU kit.
  • Page 93: List Of Angelina Field Replacement Unit (Fru) Kits

    List of Angelina Field Replacement Unit (FRU) Kits List of Angelina Field Replacement Unit (FRU) Kits The following table lists the kits that can be purchased to replace Angelina components, should they need replacing, along with the associated documents that explain how to perform the replacement procedure.
  • Page 94: Offline Diagnostic Tool

    Starting the ODT The ODT is started by holding the Manager (MNGR) button for about 20 seconds on the I/O Board of the Angelina jukebox while it is initializing. You can also press the REBOOT TO DIAGNOSTIC TOOLS (ODT) button from the main menu of the Operator interface.
  • Page 95: Hard Drive Tests

    A short S.M.A.R.T. test is run on a random selection of sectors on the disk, while a long S.M.A.R.T. test is run on all sectors of the disk. The other options in the sub-menu provide information about past tests that were run, specifications about the disk, and how much memory is left on the hard drive. Angelina Installation and Setup Guide...
  • Page 96 Service and Maintenance Offline Diagnostic Tool Angelina Installation and Setup Guide...
  • Page 97: Bridging The Internal Amplifiers

    Bridging the Internal Amplifiers Amplifier bridging enables Angelina’s internal amplifiers to produce up to 475W per channel for a maximum of 950W. Topics Bridged Amplifiers Configuration Bridging the Amplifiers Bridging Safety Considerations and Recommendations Troubleshooting Amplifier Bridging Angelina Installation and Setup Guide 901029-001 Rev 01...
  • Page 98: Bridged Amplifiers Configuration

    Operator interface. Bridging the Amplifiers 1. Pause Angelina. 2. Unlock and open Angelina’s door. 3. Disconnect the Euroblock connectors from the zone(s) you will be bridging. 4. Rewire the speaker cables going into the disconnected Euroblock connectors as follows: •...
  • Page 99 8. Next, go to SOUND > Bridge Zones. Bridge Zones 9. Turn on bridging ONLY for the zone(s) you rewired. 10. Touch the CONFIRM button to apply the change. 11. You will be prompted to confirm again. Confirmation message Angelina Installation and Setup Guide...
  • Page 100: Bridging Safety Considerations And Recommendations

    Using speakers that are not appropriately rated could damage the speakers. Bridging should only be used with Angelina’s internal amplifiers. Attempting this with any other amplifier (including the ones offered by TouchTunes for other jukebox models) could cause degraded audio quality, and damage to the amplifier or the speakers.
  • Page 101: Troubleshooting Amplifier Bridging

    • Make sure Angelina is not paused, then (short-circuit, overload, etc). raise the output volume slowly. • Angelina is paused, or volume is too low.
  • Page 102 Bridging the Internal Amplifiers Troubleshooting Amplifier Bridging Angelina Installation and Setup Guide...
  • Page 103: Connection Diagram

    Angelina and other external components such as the remote. You can refer to this diagram while setting up the Angelina jukebox in a location, or as a post-installation check to ensure that all the components are connected correctly.
  • Page 104 Connection Diagram Angelina Installation and Setup Guide...
  • Page 105 Connection Diagram Angelina Installation and Setup Guide...
  • Page 106 Connection Diagram Angelina Installation and Setup Guide...
  • Page 107: Acronyms

    Dynamic Host Configuration Protocol Direct Injection Domain Name System Digital Signal Processing Digital Video Interface Electrostatic Discharge Field Replacement Unit Frequency-Shift Keying Hardware HDMI High Definition Multimedia Interface Input/Output International Currency Technologies Corporation Angelina Installation and Setup Guide 901029-001 Rev 01...
  • Page 108 Power Return Authorization Revision Radio Frequency Registered Jack Root Mean Square SATA Serial Advanced Technology Attachment S.M.A.R.T. Self-Monitoring, Analysis and Reporting Technology STKR Stacker Touch Screen User Interface Upgrade Kit United States Universal Serial Bus Angelina Installation and Setup Guide...
  • Page 109 Acronyms Acronym Definition Video Graphics Array Angelina Installation and Setup Guide...
  • Page 110 Acronyms Angelina Installation and Setup Guide...
  • Page 113 The Octave Music Group, Inc. Technical Support 7250 Mile End, Suite 202 888-338-5853 850 Third Ave, 15th Floor Montreal, Quebec, www.touchtunes.com New York, NY 10022 Canada, H2R 3A4 Copyright © 2018 The Octave Music Group, Inc. (formerly known as TouchTunes Interactive Networks, Inc.)
  • Page 114 901029-001 Rev 01...

Table of Contents

Save PDF