®
AirSep
Corporation
4.0
Components Description
The drawings in this section illustrate the location of the main components of the
Onyx/Onyx+/Onyx Ultra oxygen generators. All models include similar components
unless noted otherwise; however, the location and size of these components varies
among the different models. Refer to Appendix A of this instruction manual for
general layout drawings and specifications.
4.1
External Components
Figure 4-1 below illustrates the external components.
Circuit Breaker
Hour Meter
Flow Meter
The design of the AirSep Onyx, Onyx+ and Onyx Ultra Oxygen Generators allows
for easy access and removal of most components. This allows you to perform
scheduled maintenance, repair, and replacement of parts with minimal time and
effort.
Onyx/Onyx+/Onyx Ultra Instruction Manual
Figure 4-1 External Components (Typical Oxygen Generator)
On/Off Switch
Gross Particle
Filter
Oxygen Outlet
Power Cord
4-1