The Data Usage/Statistics Screen - ZyXEL Communications WAH7608 User Manual

Table 14 Configuration > Network > WiFi Client
LABEL
SSID
Signal Strength (dBm)
Channel
Encryption Type
Total Num
Scan

8.8 The Data Usage/Statistics Screen

This screen allows you to configure limiting the amount of the package data.Click Configuration >
Network > Data Usage > Data Usage/Statistics. The screen appears as shown next.
Figure 32 Configuration > Network > Data Usage > Data Usage/Statistics
The following table describes the labels in this screen.
Table 15 Configuration > Network > Data Usage > Data Usage/Statistics
LABEL
Enable Data Limit
Total Allowance
Notify me when data usage
reaches
Reset Date
Chapter 8 Network
DESCRIPTION
This shows the descriptive name of the wireless network detected by the WAH7608.
Tap on an SSID and a pop-up window appears. Enter the Pre-Shared Key or
password and click Connect so the WAH7608 connects to the wireless network.
Figure 31 Pre-shared Key
This shows the strength of the wireless network's radio signal measured in dBm.
This shows the channel the wireless network uses.
This shows the data encryption method the WAH7608 uses for the wireless
connection.
This shows the total number of wireless networks your WAH7608 detects.
Click Scan to refresh the list of available wireless networks.
DESCRIPTION
Select the check box to activate a limiting amount of package data.
Specify the limiting the amount of the package data (in GB) in this field.
Specify the percentage of data usage the WAH7608 has to reach to send a
notification.
Select the day of the month on which the WAH7608 restarts calculating the amount
of package data per month.
WAH7608 User's Guide
69