The Apn Setting Screen - ZyXEL Communications WAH7608 User Manual

The following table describes the labels in this screen.
Table 11 Configuration > Network > Connection
LABEL
Connection Operation
Connection Control
Roaming Mode
Item
PDN Type
State
Cellular Profile

8.3 The APN Setting Screen

Use this screen to view or configure a connection profile. A connection profile defines the parameters
that you need to connect to a mobile network, such as the APN, user name and password. Click
Configuration > Network > APN Configuration. The screen appears as shown next.
Figure 25 Configuration > Network > APN Configuration
Chapter 8 Network
DESCRIPTION
This field displays the connected mode of the WAH7608. Select Auto Mode to
connect to the mobile network automatically if there is an available mobile
network. Otherwise, select Manual Mode. Click Change to apply your changes.
Select Enable data roaming on the WAH7608. Otherwise, select Disable. Click
Change to apply your changes.
4G roaming is to use your mobile device in an area which is not covered by your
service provider. Enable roaming to ensure that your WAH7608 is kept connected to
the Internet when you are traveling outside the geographical coverage area of the
network to which you are registered.
This field always displays WAN Status.
This displays the type PDN (Packet Data Network) of the connection profile.
• This displays Connected when the connection profile has a connection with the
ISP.
• This displays Connecting when the connection profile is attempting a
connection with the ISP.
• This displays Disconnected when the connection profile is not connected to the
ISP.
• This displays Disconnecting when the connection profile is disconnecting from
the ISP.
Click Connect for the WAH7608 to attempt a connection with the ISP.
This is the profile ID automatically by the WAH7608 to the connection profile.
WAH7608 User's Guide
64