ZyXEL Communications WAH7608 User Manual page 120

I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the WAH7608.
Make sure the WAH7608 is correctly installed and turned on. See the Quick Start Guide and
2
on page 12.
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled.
Make sure your device is connected to the WAH7608 and is in the same subnet as the WAH7608.
4
Make sure the WAH7608's WiFi LAN is enabled. You can enable or disable the WAH7608's WiFi network
5
by pushing on the WPS on the WAH7608 on the WAH7608. See
Reset the device to its factory defaults, and try to access the WAH7608 with the default IP address. To
6
reset your WAH7608 press the power button and release it when the OLED screen displays Reset. See
Disconnect your device from the Internet (WiFi) and then connect to the WAH7608 once again.
7
If the problem continues, contact the vendor.
8
I forgot the password of the web configurator.
The default user name is admin. The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. To reset your WAH7608 press the
2
power button and release it when the OLED screen displays Reset.
I can access the Login screen, but I cannot log in to the WAH7608.
Make sure you have entered the user name and password correctly. The default user name is admin
1
and the default password is 1234. These fields are case-sensitive, so make sure [Caps Lock] is not on.
This can happen when you fail to log out properly from your last session. Try logging in again after five
2
minutes.
Disconnect and connect to the WAH7608 again.
3
Chapter 15 Troubleshooting
WAH7608 User's Guide
120
Section 1.7 on page 12.
I
Section 1.6