The Password Screen; The Session Timeout Screen - ZyXEL Communications WAH7608 User Manual

Figure 71 System > Setting > Firmware Upgrade

14.4 The Password Screen

This screen allows you to change the WAH7608's system password. It is strongly recommended that you
change your WAH7608's system password. To access this screen, click System > Setting > Password.
Figure 72 System > Setting > Password
The following table describes the labels in this screen.
Table 36 System > Setting > Password
LABEL
Current Password
Password
Reenter New
Password
Apply

14.5 The Session Timeout Screen

To access this screen, click System > Setting > Password > Session Timeout. Use this screen to configure
the length of inactive time before the WAH7608 automatically logs a user out of the web configurator.
Enter the time in the Session Timeout (Min) field, then click Apply to save your changes.
Chapter 14 System
DESCRIPTION
Type the password you are currently using to log into the WAH7608 web configurator.
Type your new system password of between 4 and 24 characters. Note that as you type a
password, the screen displays as dot (.) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the WAH7608.
WAH7608 User's Guide
114