The Oled Display Screen; The Reset Screen; The Reboot Screen - ZyXEL Communications WAH7608 User Manual

14.9 The OLED Display Screen

To access this screen, click System > Setting > Power Saving > OLED Display. Select the number of
minutes the WAH7608 waits before it turns off the OLED display screen. Click Apply to save your
changes.
Figure 77 System > Setting > Power Saving > OLED Display

14.10 The Reset Screen

To access this screen, click System > Setting > Reset. The Reset screen allows you to reset your WAH7608
back to the factory default settings. When the Status field displays Ready, click Reset.
Figure 78 System > Setting > Reset

14.11 The Reboot Screen

Click System > Setting> Reboot, the following pop-up window appears. Use this screen to restart the
WAH7608. System restart allows you to reboot the WAH7608 without turning the power off. Click OK to
reboot the WAH7608. Wait a few minutes until the login screen appears. If the login screen does not
appear, type the IP address of the WAH7608 in your Web browser.
Figure 79 System > Setting > Reboot
Chapter 14 System
WAH7608 User's Guide
118