Fujitsu PRIMERGY RX300 S3 Operating Manual page 16

Features Introduction
ServerStart
You can configure the PRIMERGY server quickly and purposefully with the
ServerStart software provided. User-guided menus are available for installing the
server operating system (for further details see section "Configuring the Server"
on page 60).
Service and support
PRIMERGY servers are service-friendly and modular, thus enabling quick and
simple maintenance.
The handles and locks (touch points) of the different hot-plug components are
colored green to ensure simple and immediate recognition.
In order to avoid damage to components by incorrect handling when they are
being installed and removed, green highlighting also identifies the component
areas that can be touched without causing damage to the respective
component.
PRIMERGY Diagnostic LEDs arranged on the system board identify the
component (memory module, CPU) on the system board that is not functioning
correctly.
The flash EPROM program supplied with the Fujitsu Siemens Computers
utilities supports a fast BIOS update.
The integrated Remote Management Cotnroller (iRMC) as well as the optional
remote test and diagnostics system allow the PRIMERGY RX300 S3 server to
be maintained from remote locations. Remote diagnosis can be performed as a
result for system analysis, remote configuration and remote restart should the
operating system or hardware fail.
RemoteView
RemoteView is the remote management solution from Fujitsu Siemens
Computers for Intel-based PRIMERGY systems. RemoteView and the relevant
hardware components integrated on the system board allow remote monitoring
and maintenance as well as fast restoration of operability in the event of errors.
16 Operating manual
RX300 S3