Related Manuals - Omron CJ1W-CORT21 Operation Manual

Related Manuals

The following manuals are related to the NJ-series Controllers. Use these manuals for reference.
Manual name Cat. No.
NJ-series CPU Unit W500
Hardware User's Manual
NJ-series CPU Unit Soft- W501
ware User's Manual
Sysmac Studio Version 1 W504
Operation Manual
CJ-series User Defined W517
CAN Units Operation
Manual for NJ-series
CPU Unit (This docu-
ment)
CJ-series User Defined CAN Unit Operation Manual for NJ-series CPU Unit (W517)
Model numbers Application
□□□□
Learning the basic specifi-
NJ501-
cations of the NJ-series
CPU Units, including intro-
ductory information,
designing, installation, and
maintenance. Mainly hard-
ware information is pro-
vided.
□□□□
Learning how to program
NJ501-
and set up an NJ-series
CPU Unit. Mainly software
information is provided.
SYSMAC- Learning about the operat-
□□□
ing procedures and func-
SE2
tions of the Sysmac Studio.
CJ1W-CORT21 Learning about the func-
tions and operating proce-
dures when the CJ-series
User Defined CAN Unit is
used in an NJ-series sys-
tem configuration.
Description
An introduction to the entire NJ-series system is
provided along with the following information on
a Controller built with an NJ501 CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
Use this manual together with the NJ-series
CPU Unit Software User's Manual (Cat. No.
W501).
The following information is provided on a Con-
troller built with an NJ501 CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 lan-
guage specifications
Use this manual together with the NJ-series
CPU Unit Hardware User's Manual (Cat. No.
W500).
Describes the operating procedures of the
Sysmac Studio.
The functions and operating procedures when
the CJ-series User Defined CAN Unit is used in
an NJ-series system configuration are
described.
31