Download Print this page

Crestron C2N-IO Installation Manual page 2

Control port expansion module

Advertisement

As of the date of manufacture, the C2N-IO has been tested
and found to comply with speci cations for CE marking.
The C2N-IO has been tested by Intertek Testing Services NA
Inc. and complies with ANSI/UL 2043, the Standard for Fire
Test for Heat and Visible Smoke Release for Discrete
Products and Their Accessories Installed in Air-Handling
Spaces - Third Edition.
Federal Communications Commission (FCC) Compliance
Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
CAUTION: Changes or modi cations not expressly
approved by the manufacturer responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV
Industry Canada (IC) Compliance Statement
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
The product warranty can be found at
www.crestron.com/warranty.
The speci c patents that cover Crestron products are listed at
patents.crestron.com.
Certain Crestron products contain open source software. For
speci c information, please visit
www.crestron.com/opensource.
Crestron, the Crestron logo, 3-Series, and Cresnet are either
trademarks or registered trademarks of Crestron Electronics,
Inc. in the United States and/or other countries. 3M and Dual
Lock are either trademarks or registered trademarks of 3M
Company in the United States and/or other countries. Other
trademarks, registered trademarks, and trade names may be
used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims
any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or
photography.
This document was written by the Technical Publications
department at Crestron.
©2015 Crestron Electronics, Inc.
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Installation Guide
DOC. 7236D
(2031434)
12.15
Speci cations subject to
change without notice.

Advertisement

loading