Alarm Functions - Leica IP S Instructions For Use Manual

5
Operation
Display
5.3

Alarm functions

The Leica IP S is equipped with two different alarm functions:
Instrument alarm
The printer has a beeper that emits acoustic signals indicating important instrument states and
functions.
• Upon pressing a button:
• Magazine empty/tray stack full:
• In case of error:
• When ending the head cleaning:
50
Status messages
15 Cleaning the print head.
Screen prompt requesting the operator to manually clean the
print head (cleaning swab + alcohol).
The printer is off-line. No new print jobs are accepted.
87 After the last cartridge change, CLEAN
has been pressed to indicate to the printer that a
cartridge has been inserted. The printer has received a print job
but is unable to print because the cartridge contains cleaning
fluid instead of ink.
Remedy:
Cancel the print job. Switch the printer off and back on and
change the cartridge. Then press LOADED or ERROR and wait
for 2 minutes.
Caution
Never press LOADED after reinserting an ink cartridge which
has already been used. This could cause permanent damage to
the printer.
81-83 Warning: Problem with slide ejection from a magazine!
The display consists of two parts: The
magazine ejector is mechanically blocked. The second digit
of the message (1-3) specifies the number of the affected
magazine.
Error messages
All displayed numbers
1 short beeping sound
2 short beeping sounds
5 short beeping sounds
5 short beeping sounds
is a warning that a
8
from to and to
20 78 89 93.
Version 2.0, Revision I
transport