Safety; Safety Instructions - Leica IP S Instructions For Use Manual

2.

Safety

Warning
The safety and caution notes in this chapter must be observed at all times.
Make sure to read these instructions, even if you are already familiar with the operation and use of other
products.
2.1

Safety instructions

These Instructions for Use include important instructions and information related to the operating safety
and maintenance of the instrument.
The Instructions for Use are an important part of the product, and must be read carefully prior to startup
and use and must always be kept near the instrument.
This instrument has been built and tested in accordance with the safety regulations for electrical
measuring, control, regulating and laboratory devices.
To maintain this condition and ensure safe operation, the user must observe all notes and warnings
contained in these Instructions for Use.
Note
These Instructions for Use must be appropriately supplemented as required by the existing
regulations on accident prevention and environmental safety in the operator's country.
For current information about applicable standards, please refer to the CE declaration of conformity
on our Internet site:
http://www.LeicaBiosystems.com
Warning
The protective devices on both instrument and accessories may neither be removed nor modified.
Only authorized and qualified service personnel may repair the instrument and access the
instrument's internal components.
Use only the provided
plug does not fit in your socket, contact our service.
Residual risks:
The instrument has been designed and constructed with the latest state-of-the-art technology and
according to recognized standards and regulations with regard to safety technology. Operating or
handling the instrument incorrectly can place the user or other personnel at risk of injury or can
cause damage to the instrument or other property. The machine may be used only as intended and
only if all of its safety features are in proper working condition. Malfunctions that impede safety must
be remedied immediately.
Leica IP S
power cord. It must not be replaced with a different
Safety
power cord. If the power
2
11