Status Messages - Leica IP S Instructions For Use Manual

7
Troubleshooting
2. A Reset restores the printer to the same state as directly after switching on. All print jobs in the
print queue are deleted.
3. If the same error continues to be displayed even after a reset, switch the printer off via the
power switch (back panel) and, after a short waiting period of approx. 30 sec., switch it back
on. If this does not eliminate the problem either, call Leica Technical Service.
7.2

Status messages

(for additional information, refer also to
Display
code
INK EMTPY flashing
68
(→ p. 49 – 5.2 Display
LED
MAG. EMPTY flashing
MAG. EMPTY flashing
MAG. EMPTY flashing
MAG. EMPTY flashing
–
–
–
–
–
indications))
Meaning
The printer is waiting for an individual slide to be placed in
the feeding chute for printing.
Magazine no. 1 empty
Magazine no. 2 empty
Magazine no. 3 empty
Ink print head cleaning is in progress.
Temperature in the flash power supply is too high.
Flash bulb has reached its maximum life.
Prompt requesting maintenance.
Prompt to clean the print head.
Ink cartridge has been changed; instrument waiting for
confirmation via ERROR, CLEAN, or LOADED button.
Version 2.0, Revision I