Table of Contents
Advertisement
10
View
11
SEQ
12
Display
13
Monitor
14
Zoom
Channel
15
Buttons
16
Copy
1.2 Rear Panel
No. Name
Audio Input 1~16
1
(RCA)
Loop Video
2
Output 1~16
3
eSATA Port
4
CVBS Port (BNC)
5
Alarm Input /Out
In Live mode, press to switch to the layout type for displaying the
channel feeds.
Press to enter the automatic sequence mode. This will show each
channel feed in sequence. Press again to exit sequence mode.
Press to cycle between the info display types (channel and status bar
info).
In Live mode, press to switch between Main and Call Monitor.
In Live mode, press to zoom the display of a channel. Press the
Menu/ESC button to exit Zoom mode.
Select the full screen channel in live mode.
Select the full screen channel in playback.
Press to enter the Copy Menu.
1
8
Description
Connects to the audio input devices such as microphones. Note that
the microphone with a (built-in) amplifier and external power supply
is required.
You can also optionally connect the monitors to each Loop Video
Output to display the video of the corresponding channel. Please
refer to 3.1 Monitor Connection.
Connects to an external eSATA storage device, please set up an RAID
array of the eSATA device before using.
This can be used as a Call monitor output. Connects to the monitor
using a BNC cable (see 2.3.1 Monitor Connection).
Connects up to 16 alarm inputs and 1 alarm output devices. You can
also connect to the radio-controlled clock for time synchronization.
Please refer to 2.3.2 Alarm I/O.
2
ELUX16x2 FHD Hybrid DVR
6
5
2
4
3
CVBS
9
10
11
12
1
7
RS485
+ -
1
13
14
Advertisement
Table of Contents
