Table of Contents
Advertisement
3. Basic Connection
The instructions below the figure describe the basic connection for the ELUX16x2.
3
Camera 1~ 16
1. Connect the line level audio input devices to the DVR. Note that the audio input devices,
such as microphones, are required to have a (built-in) amplifier and external power supply.
2. Using the supplied Power Adaptor, connect one end to the DC 12V port on the DVR and
the other end to the power outlet.
Note: Please ensure to connect the internal power cables to the internal HDDs before
powering on the DVR.
3. Connect the cameras to the DVR using the coaxial cables. EverFocus eZ.HD cameras are
recommended. (HD-CVI / HD-SDI cameras are not supported)
4. To listen to audio of video source, connect speakers to the Audio Out port. Note that
speaker with a (built-in) amplifier and external power are required.
5. To view videos, connect a monitor to the HDMI port using the HDMI cable supplied by the
monitor manufacturer.
6. Use a standard RJ-45 cable to connect the DVR to the network for remote viewing or using
EverFocus surveillance system (Genie XMS).
7. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control or the control buttons on the front panel.
ELUX16x2 FHD Hybrid DVR
1
Audio In 1~16
4
5
Line Level
Main Monitor
Audio Out
(HDMI)
Web Remote
Client
11
2
Line Level
Power Supply
CVBS
RS485
+ -
6
7
Mouse
Network
CMS:
Genie XMS
Advertisement
Table of Contents
