Table of Contents
Advertisement
6
Ethernet (LAN)
7
Power Switch
8
Video Input 1~16
9
VGA Port
Audio Output
10
(RCA)
11
HDMI Port
12
USB2.0 Port
13
RS-485 Port
14
Power Port
Connects to the Network.
Press to turn on or off the power.
Connects to analog HD / SD cameras using coaxial cables.
Note:
1.
The DVR can automatically configure itself as NTSC or PAL. To
do this, connect a camera to any channel of the DVR. The DVR
will detect the first connected camera format (NTSC or PAL)
and then automatically configure itself to the detected format
from the first connected camera. For example, if the format of
the first connected camera is NTSC, the DVR will configure
itself to NTSC format.
2.
All video inputs are compatible with all resolution types of
cameras, such as 1080p, 720p, 960H and D1 cameras (HD-CVI /
HD-SDI cameras are not supported).
This can be used as a Main monitor output. Connects to the monitor
using a VGA cable (see 2.3.1 Monitor Connection).
Connects to the audio output devices, such as speakers. Note that
the speaker with a (built-in) amplifier and external power supply are
required.
This can be used as a Main monitor output. Connects to the monitor
using a HDMI cable (see 2.3.1 Monitor Connection).
The USB2.0 port for connecting to a mouse, external storage device
or EKB200 keyboard.
Connects to the RS-485 device (EKB500) or PTZ camera.
Connects to the 12VDC 8A power using the supplied Power Adaptor.
3
ELUX16x2 FHD Hybrid DVR
Advertisement
Table of Contents
