Grandstream Networks GXV3370 Administration Manual page 51

Ip multiphone for android
Hide thumbs Also See for GXV3370:
Table of Contents

Advertisement

Validate
Configures whether to validate certification chain, when TLS/TCP is configured for
Certification
SIP Transport. If this is set to "Yes", phone will validate server against the new
Chain
certificate list. The default setting is "No".
Validate
Specifies if the phone system will check the incoming SIP messages caller ID and
Incoming SIP
CSeq headers. If the message does not include the headers, it will be rejected.
Messages
The default setting is "No".
Allow
It is used to configure whether to dial the number carried by Refer-to after receiving
Unsolicited
SIP REFER request actively. If it is set to "Disabled", the phone will send error
REFER
warning and stop dialing. If it is set to "Enabled/Force Auth", the phone will dial the
number after sending authentication, if the authentication failed, then the dialing will
be stopped. If it is set to "Enabled", the phone will dial up all numbers carried by SIP
REFER.
The default is "Disabled".
Only Accept SIP
Answers the SIP request from saved servers when set to "Yes", only the SIP
Requests from
requests from saved servers will be accepted; and the SIP requests from the
Known Servers
unregistered server will be rejected.
The default setting is "No".
Check SIP User
Configures the phone system to check the SIP User ID in the Request URI of the
ID for Incoming
SIP INVITE message from the remote party. If it doesn't match the phone's SIP User
INVITE
ID, the call will be rejected.
The default setting is "No".
Allow SIP Reset
It is used to configure whether to allow SIP Notification message to perform factory
reset on the phone. The default setting is "No".
Authenticate
Configures the phone system to authenticate the SIP INVITE message from the
Incoming
remote party. If set to "Yes", the phone will challenge the incoming INVITE for
INVITE
authentication with SIP 401 Unauthorized response.
The default setting is "No".
SIP Realm used
Configure this item to validate incoming INVITE, but you must enable authenticate
for Challenge
incoming INVITE first to make it take effect. You can verify the NOTIFY information
INVITE &
for the provision, including check- sync, resync and reboot, but only when SIP
NOTIFY
NOTIFY authentication enabled first to make it take effect.
Ring Tones
Account Ring
Configures the ringtone for the account. Users can set ringtones from the dropdown
Tone
list. User can also import customized ringtone from LCD Setting menu. The
customized ringtone file name will also be showed up in the dropdown list that allows
user to select.
Ignore Alert-Info
Configures the default ringtone. If set to "yes", the incoming alert info header from
header
the SIP server will be ignored and default configured ringtone will be played. The
default setting is "No".
GXV3370 Administration Guide
Version 1.0.1.12
P a g e
|
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents