Grandstream Networks GXV3370 Administration Manual page 48

Anonymous
Rejects the calls whose SIP INVITE message includes Anonymous information in
Call Rejection from header when enabled. The default setting is "No".
Call Log Categorizes the call logs saved for this account. If it is set to "Log All", all the call logs
of this account will be saved. If set to "Log Incoming/Outgoing Calls (Missed Calls
Not Record)", the whole call history will be saved other than missed call. If it is set to
"Disable Call All", none of the call history will be saved. If it is set to "Don't Prompt
Missed Call", the phone will log the missed call histories, but there is no prompt to
indicate the missed calls on phone LCD. The default setting is "Log All".
Enable Call Configures the local start command feature. If it is set to "Yes", the feature will be
Features
enabled to recognize the local star code command. Otherwise, it will be disabled.
The default setting is "No".
Transfer on
3-way
Transfers conference from hosted party when hang up, thus other parties can
Conference
continue the conference without interruption. The default setting is unchecked.
Hang up
Use # as Dial Treats "#" as the "Send" (or "Dial") key when set to "Yes". If set to "No", this "#" key
Key
can be included as part of the dialed number or it will be used as redial key when
the input area has no number (please make sure the dial plan is properly
configured to allow dialing # out). Default setting is "Yes".
DND Call
Configures the feature code to enable the DND (Do Not Disturb) feature for this
Feature On
account. If it is configured, the phone will dial the feature code automatically when
the DND feature is enabled.
DND Call
Configures the feature code to disable the DND (Do Not Disturb) feature for this
Feature Off
account. If it is configured, the phone will dial the feature code automatically when
the DND feature is disabled.
No Key Entry
Determines the expiration timer (in seconds) for no key entry. The dialed digit will
Timeout (s)
be send out if no other digits entered within the set period. The default value is 4
seconds. The valid range is from 1 to 15. This feature does not work if the dialer
page is entered via the Account Widget on the phone.
Ring Timeout
Defines the expiration timer (in seconds) for the rings with no answer. The default
(s)
setting is 60. The valid range is from 10 to 300.
Refer-To Use Sets the phone system to use the target's Contact header tag to the Refer-To header
Target Contact
in the SIP REFER message during an attended transfer.
The default setting is "No".
RFC2543 Hold
If yes, c=0.0.0.0 will be used in INVITE SDP for hold.
Call Forward
Call Forward
Sets the Call Forwarding feature for this account.
Type
•
None: Disable call forwarding feature.
•
Unconditional: Set to forward all calls to a specified account.
GXV3370 Administration Guide
Version 1.0.1.12
P a g e |
48