Content Sharing - AMX NMX-MM-1000 Administrator's Manual

Content Sharing

Content Sharing is an AMX app that enables sharing content from AMX Modero X G5 touch panels to display on Enzo meeting room
presentation systems. With Content Sharing enabled, G5 touch panel users can enter the Enzo IP address and connect to Enzo and
share content from USB or other downloads.
Checking the Auto Discovery box on Enzo's Content Sharing page enables G5 touch panel users to scan the network for available
Enzo devices without knowing the IP addresses. Refer to the Modero X G5 Touch Panel Instruction Manuals for details on sharing
content with Enzo.
System Settings - Content Sharing
FIG. 53
The following table details the Content Sharing options:
Display Options
Enable
Username
Password
Port
Confirmation Dialog
Auto Discovery
When a G5 Touch Panel initiates Content Sharing to Enzo, if the Confirmation Dialog box is checked on Enzo, a confirmation dialog
window appears on the Enzo display (FIG. 54). Click OK to accept. Only one file transfer at a time is allowed from the touch panel to
Enzo. If the file starts buffering, users can click on the Enzo desktop to use other features until the buffering is complete. At that
time the content will appear automatically on the Enzo display.
System Settings - Content Sharing
FIG. 54
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
This option enables Content Sharing so AMX touch panels can connect and share content.
Specify a Username that the touch panel will need to initially connect and share content. The user
name must match the Touch Panel Content Sharing settings.
Specify a Password that the touch panel will need to initially connect and share content. The
Password must match the Touch Panel Content Sharing settings.
Specify a port on the network to use for data transfer between the Enzo and the content sharing
device.
Checking this box will make Enzo launch a confirmation window whenever a remote panel tries to
share content on Enzo's display. Click OK to allow or Cancel to deny the content. Unchecked, the
content will automatically start playing on Enzo's display.
Checking this box will enable remote panels to discover Enzo devices on the network without
knowing the IP and Port information. If the Username and Password are enabled, the panel user
will still need to enter these before establishing a connection.
Enzo System Settings
28