Front Panel Components; Power; Usb; Lan 10/100 - AMX NMX-MM-1000 Administrator's Manual

Rear Panel Components
The following section lists the components on the rear panel of the NMX-MM-1000.
NMX-MM-1000 (Rear Panel)
FIG. 2

USB

The rear panel features two Type-A USB connectors for mouse and keyboard functionality, or reading from and writing to a mass
storage device, such as USB hard drives or flash drives. (USB external hard drives may require their own power sources. The
maximum current allowed across all USB ports is 4W.)
NOTE: The USB connectors support USB mass storage devices using a FAT format. USB mass storage devices using an NTFS format
may not work on these ports.
NOTE: Only one USB drive can be mounted and used at a given time. Once a USB drive is connected and Enzo mounts the drive, the
f iles on it may be accessed. If a message stating the USB drive is mounted is not received, Enzo did not recognize the drive. A storage
device's contents are not accessible if the device is connected while another storage device occupies a USB port. If a f irst USB drive is
connected, mounted, and unmounted, a second USB drive will still not be recognized unless the f irst USB drive is removed from the
Enzo device.

LAN 10/100

The rear panel features two 10/100 Base-T RJ-45 LAN ports for network connection via Cat5 cable. Enzo obtains its power from a
Power-over-Ethernet (PoE) source connected to Port 1. This source could be either a PoE injector (not included) or a network
switch with PoE output.
FIG. 3 provides the pin outs and signals for the LAN connector and cable.
RJ-45 Wiring Diagram
FIG. 3
FIG. 4 describes the blink activity for the LAN connector and cable.
Link LED (amber) lights
when the LAN cables
are connected and
terminated correctly.
LAN Connector / LEDs
FIG. 4
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
USB mouse, keyboard, memory stick, storage drives
Cat5 cable in
from PoE injector
A L
ETHERNET
10/100
HDMI cable out
to video monitor
Activity LED (green)
lights when receiving or
transmitting LAN
data packets.
Overview
3