Updating The Firmware; Care And Maintenance - Monoprice Delta Pro User Manual

Updating the Firmware

We recommend updating your machine to the latest firmware
before printing for the first time to ensure you have the latest
version. Monoprice will release updates to the Delta Pro's
firmware from time to time on the Delta Pro's webpage. Once
you've downloaded the latest firmware, unzip the files to a USB
drive and follow the steps below to perform the update.
1. On the LCD screen, tap
2. Select the folder containing the .bin firmware file, then tap
Update.
3. Repeat steps 1 and 2 to update the .ui user interface file.
> System >
UPDATING THE FIRMWARE / CARE AND MAINTENANCE

Care and Maintenance

Regular care and maintenance will keep your Delta Pro looking
and working like new for years. Please follow these care and
maintenance guidelines for each component of your machine.
• Clean the machine's frame with a damp, lint-free cloth.
• Clean the glass build plate with rubbing alcohol or another
ammonia-free solvent and a soft, lint-free cloth such as
microfiber.
• Lubricate the magnetic control arms with PTFE or lithium
grease on at least a monthly basis. This can be done by
applying a small amount of grease onto the magnets of the
control arms which function as a lubricant reservoir. After a
few prints, wipe away any excess grease from the ball joints
with a lint-free cloth.
• The carriages have been factory calibrated to ensure many
thousands of hours of consistent, precision movement. If
after an extended period of time they seem loose or noisy,
they may require adjustment or lubrication.
• To adjust the wheel spacing,
• USE ONLY silicone lubricant on the wheels when they
seem noisy
• Use a dry brush to clean the extruder gear's teeth when they
become clogged or when the gear starts to slip.
• Clean the LCD touchscreen display while the machine is
powered off using a soft cloth. DO NOT use any solvents or
cleaning fluids on the display.
13