Maintenance And Service; Troubleshooting Diagram - DAXOM Naviels UKDAX-10EDT Installation And Operating Manual

8. MAINTENANCE AND SERVICE

During guarantee time we provide Free of Charge Service to our
customers against defect of related materials and production. When you
meet with problem while using, please contact with our after sales
service department. Repairing and maintenance of the device by
unauthorizedperson will make the device out of warranty. Afterwards our
company will not responsible from damages and accidents.

9. TROUBLESHOOTING DIAGRAM

Damage Code
E0
E1
E3
E4
E5
Damage
1- Water pressure is not enough
2- Water pressure switch damage
Heating sensor damage
Warning of water temperature is over 85
Warning of limit thermostat is in circuit
1-Pipe is blocked or valve is closed 2-Pump
damage
3-Flowmeter damage
1- Set the water pressure between 1-2 bars.
2- Call authorized service
Although you wait for a while, if you have still seen the
same code, call the authorized service.
o
C 1 min later device will start to operate.
1- When the temperature is down under 85
going to start operate.
2- Although you wait for a while, if you have still seen
the same code, call the authorized service.
1- Control if it is closed valve or not at heating
installation and clean silt trap.
2- Call the authorized service
Solution
o
C, it is