DAXOM Naviels UKDAX-10EDT Installation And Operating Manual page 22

6.4.7MAKING SETTING OF THE CAPACITY
Device can operate with 3 different capacities. P1 mean is 1/3 capacity,
P2 mean is 2/3 capacity, P3 mean is full capacity. For example, if the
device is 24Kw, P1: 8Kw, P2: 16Kw, P3:24Kw.
While the device is operating regularly,
1. Enter setting menu by pressing
2. Press
3. With
4. Exit setting menu by pressing
6.4.8MAKING SETTING OF THE OPERATION MODE
Device can operate with 3 different operation modes.
1. Only Radiator Heating Mode: Device only makes heating. Although
tap water is wanted to heat, heating tap water cannot be occurred
while heating mode is active.
2. Only Tap Water Heating Mode: Device only heats the tap water. This
mode can be named also as "Heater" mode or "Summer" mode.
3. Radiator and Tap Water Heating Mode: Device makes both radiator
heating and tap water heating. Priority is for tap water heating. When
the device heats, if it is needed tap water, device operates for heating
tap water by shut down radiator heating.
4 times is seen, capacity indicator blinks.
or buttons, heating capacity is set as P1, P2 or P3.
button 2-3 seconds.
button.