DAXOM Naviels UKDAX-10EDT Installation And Operating Manual page 24

 Weekends can be chosen (SUN. SAT.)
 Days can be chosen one by one.
4. Press to
program 1, 2 or 3 is chosen.
5. Press to
program start hour is determined.
6. Press to
program start minute is determined.
7. Press to
program finish hour is determined.
8. Press to
program finish minute is determined.
9. Press to button, temperature indicator blinks. With
chosen program operation temperature is determined.
10. Press
With or
difference is determined.
11. Press button after choosing preferred time program, time
programs adjust by starting 3
12. There is no obligation for adjusting all time programs. One or two
of them can adjustfrom time programs.
13. After programming is finished, when it is pressed to button or
waiting 10 sec without pressing any button, it is existed from setting
menu by recording committed adjustments.
button. With
button, program start time blinks. With
button, program start minute blinks. With
button, program finish hour blinks. With
button, program finish minute blinks. With
button, is seen. Temperature setting indicator blinks.
chosen program preferred DT temperature
or
rd
clause.
buttons preferred setting
or
or
or
or
or