Honeywell Dolphin CN80 Quick Start Manual page 17

Sync Data
To move files between your CN80 and a computer:
1. Connect the CN80 to your computer using a USB charge/
communication accessory.
2. By default, the CN80 is in USB charging only mode. To
enable file transfers, swipe down from the top of the screen
to access the Notifications panel.
3. Touch the USB notification, and then select either Transfer
files or Transfer photos (PTP).
4. Depending on the Windows® operating system on your
computer, either open File Explorer or Windows Explorer.
5. Under "Computer" or "This PC", click on the CN80. You can
now copy, delete and/or move files or folders between the
computer and CN80 or a microSD card installed in the
CN80 as you would with any other storage drive (e.g., cut
and paste or drag and drop).
17