Rotisserie Igniter - Viking VGBQ300-2RE2 Service Manual

Service Diagnostics and Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect gas supply and electrical power to unit
before servicing. After servicing, reconnect electrical power and gas supply.

Rotisserie Igniter

The rotisserie burner is an infrared burner which
provides intense searing radiant heat. When the
burner is selected, the valve supplies gas flow and
the igniter supplies the spark source. Once the
burner is lit, the rotisserie burner will reach cooking
temperatures in about one minute. The red glow
will even out in about five minutes.
To access the Rotisserie Igniter:
1. Open lid and remove upper rack.
Upper Rack
2. Locate rotisserie igniter cover(s). Remove two
screws securing igniter cover.
© 2011 Viking Preferred Service
WARNING
Igniter Cover
Screws
3. Remove rack holder and igniter cover.
4. Remove screw securing front of igniter.
5. Remove screws and rear access panel.
Rear View
Screw
Note: VGIQ410-3RE2 model shown
Screw
25