Cisco Nexus 7000 Series Configuration Manual page 31

Using Modular QoS CLI
When you configure QoS features, and the system requests MQC objects, you can use one of the system-defined
objects shown in the table below.
Table 4: System-Defined MQC Objects
Table
System-Defined Type qos Class Maps
System-Defined Type queuing Class Maps
System-Defined Table Maps
System-Defined Queuing Policy Maps
Type qos class maps that are defined by the system are listed in the table below.
Note You cannot reference the conform-color-in, conform-color-out, exceed-color-in, or exceed-color-out class
maps in a policy map.
Table 5: System-Defined Type qos Class Maps
Class Map Name
class-default
conform-color-in
conform-color-out
exceed-color-in
exceed-color-out
Type queuing class maps that are defined by the system are listed in the table below.
Table 6: System-Defined Type queuing Class Maps
Class Map Queue Name
1 Gigabit Module Ingress: 2 queues with 4 thresholds per queue
Description
Type qos class maps
Type queuing class maps
Table maps
Policy maps
Description
Type qos class map that is assigned to all packets that
match none of the criteria of traffic classes that you
define in a type qos policy map. You can use
class-default for mutation.
Type qos conform color class map in the input
direction. This color-aware class map makes a policer
color-aware for a conform action.
Type qos conform color class map in the output
direction. This color-aware class map makes a policer
color-aware for a conform action.
Type qos exceed color class map in the input direction.
This color-aware class map makes a policer
color-aware for an exceed action.
Type qos exceed color class map in the output
direction. This color-aware class map makes a policer
color-aware for an exceed action.
Description
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
System-Defined MQC Objects
Default CoS Values
15