Cisco Nexus 7000 Series Configuration Manual page 149

Configuring Queuing and Scheduling on F-Series I/O Modules
Table 36: Feature History for Queuing and Scheduling for F-Series Modules
Feature Name
DSCP to Queue Mapping
Shared buffer queuing on the
F3 Series modules
DSCP to Queue Mapping
Support for 4q8q policy
templates
Support for four ingress
buffers
DSCP mapping for F2
modules
Scheduling and Queuing for
F1 Series Modules
Feature History for Queuing and Scheduling for F-Series Modules
Release
8.0(1)
6.2(10)
6.2(2)
6.2(2)
6.1(3)
6.1(1)
5.1(1)
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
Feature Information
Use the hardware qos dscp-to-queue ingress
module type f-series command to enable
dscp-to-queue mapping on M3-Series I/O
modules also.
Support for shared memory buffer queues on
the F3 Series modules only.
Support for five default templates to enable
DSCP to Queue Mapping on F-Series
Modules.
Support to enable DSCP to Queue mapping
using hardware qos dscp-to-queue ingress
module-type command.
Support for four 4q8q policy templates that
provide eight egress queues on the Cisco
Nexus 7710 switch and Cisco Nexus 7718
switch only.
Support for default-8e-4q4q-policy template
that supports four ingress buffers.
Support for DSCP mapping for F2 modules.
This chapter was added. (Chapter title
subsequently changed to accommodate other
F-Series Modules.)
133