Machine Overview - Minuteman TRS17-220 Parts And Instruction Manual

MACHINE OVERVIEW

1. Handle- Used to maneuver and position the TRS-17. Contains switch box (For switchbox, see
#17)
2. Recovery tank & lid- Lid allows access to recovery tank and creates a seal to ensure suction.
Recovery tank collects waste water.
3. Solution tank & lid- Lid allows access to the solution tank and prevents external contamination of
solution tank. Solution tank holds clean water or solution.
4. Accessory racks for hoses, cords, tools etc.- Two large racks on one side and three small racks
other side of the machine. 5 total.
5. Wand storage bracket and velcro strap- Allows the operator to secure a wand attachment to the
machine for ease of transport.
6. Non-marking front 4" locking casters and rear 10" wheels.
7. Recovery/vacuum hose inlet barb- connect your recovery vacuum hose to this barb
8. Feed hose line for chemical with threaded bottle cap- secures the feed hose line to the chemical
bottle
9. Bottle holder for chemical feed system- Holds up to a one gallon chemical bottle
10. N/A for 220v
11. Chemical dispensing valve- Select between "SOAP" and "RINSE" by turning to left or right as
marked
12. Male twist lock pigtail- Connects to 50 ft cord
13. Exhaust port hose barb- Used to connect to hose with blower attachment.
14. Pressure regulator- Decrease pressure by turning counter-clockwise or increase pressure by
turning clockwise
15. Priming/Pressure relief valve- Prime system in the event of air lock. Relieves pressure in the
event of pressure lock
16. Solution line Q.D.- Pressurized connection for solution line
17. Recovery tank dump hose
18. Switch box- one switch marked "PUMP" and one switch marked "VACUUM". Switches light up
when powered on.
Parts and Instruction Manual - TRS17 Total Recovery System
Page 10