Battery Service And Installation; Charging Of Batteries; Machine Overview; Battery Cable Routing - Minuteman M26036QP Parts And Instruction Manual

Battery Service and Installation

WARNING: Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety
glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries.

Charging of Batteries

Charging batteries generates explosive gasses. DO NOT CHARGE BATTERIES WHEN OPEN FLAMES OR
SPARKS ARE PRESENT. DO NOT SMOKE. Make sure the charger is turned off before disconnecting it from the
batteries. Charge the batteries in a well-ventilated area with battery cover removed completely. Fluid levels should
be checked before and after charging and maintained at the proper levels. If the burnisher is not used for extended
periods of time, batteries should be kept fully charged with a boost charge once a week.

Machine Overview

2
Lumina 20 Brush Drive Battery Burnisher

Battery Cable Routing

1
3
4
5

Control Panel

6
10
1. Pad Pressure Adjust knob
2. Dashboard Control Panel
3. Foot Pedal
4. Circuit Breaker 70 AMP
5. Circuit Breaker 3 AMP
6. Main Power Switch
7. Emergency Button
8. Carbon Brush Indicator
9. Pad Pressure Gauge
10. Battery Gauge
7
8
9
Page 7