Charging Of Batteries; Machine Overview; Dashboard Control Panel - Minuteman M26036TD Operation Service Parts Care

BA BA BATTER BA BA TTER TTER TTER TTERY Y Y Y Y SER SER SER SERVICE SER VICE VICE VICE AND INST VICE
W W W W W ARNING: ARNING: Battery acid can cause burns. When working on or around batteries, wear protective ARNING: ARNING:
ARNING:
clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of
batteries.
CHARGING OF BA CHARGING OF BA
CHARGING OF BA CHARGING OF BA

CHARGING OF BATTERIES

Charging batteries generates explosive
gasses. DO
BATTERIES WHEN OPEN FLAMES
OR SPARKS ARE PRESENT. DO NOT
SMOKE. Make sure the charger is
turned off before disconnecting it from
the batteries. Charge the batteries in a
well-ventilated area with battery cover
removed completely. Fluid levels should
be checked before and after charging
and maintained at the proper levels. If the burnisher is not used for extended periods of time, batteries
should be kept fully charged with a boost charge once a week.
AND INSTALLA AND INST AND INST AND INST ALLATION ALLA ALLA ALLA
TTERIES TTERIES
TTERIES TTERIES
NOT CHARGE
TION TION TION TION

Dashboard Control Panel

Dashboard Control Panel Dashboard Control Panel
Dashboard Control Panel Dashboard Control Panel
1 - On / Off Key Switch
2 - Traction Drive Direction Indicator
3 - Traction Drive Directional Switch
4 - Pad Pressure Gauge
5 - Traction Drive Speed Control
6 - Battery Gauge
3

Machine Overview

Machine Overview Machine Overview Machine Overview Machine Overview
1 - Pad Pressure
Adjustment Knob
2 - Bail Lever
3 - Dashboard Control Panel
4 - Emergency Belly Bar Stop
5 - Carbon Brush Indicator
6 - Emergency Stop Button
7 - Circuit Breaker, 70 AMP
8 - Power Connector
9 - Circuit Breaker, 3 AMP
10 - Circuit Breaker, 18 AMP
11 - Foot Pedal
12 - Dust Bag