Elo TouchSystems I-Series Quick Installation Manual page 2

Go to www.elotouch.com/support to download user manual.
1
Remove the left side cable cover by lifting upward
2
Connect the power cable. The system will power on automatically
when plugged in. A tie-wrap can be used to secure the power cable
from accidental removal.
3
Serial
Number
The system must be connected to a network for software setup.
Connect an Ethernet cable now or setup WiFi in step 5. Note the
device serial number for use in step 6.
4
The device is now ready to mount in your environment. A selection of desk,
shelf, and wall mount options is available at www.elotouch.com
5
After powering on the I-Series Display, the Network screen on the control
panel will appear if no wired connection is found. Set up your wireless network.
Note: The control panel can be opened any time by pressing the HOME and
POWER keys simultaneously, and typing in a password. The default password
is 1elo.
6
To add your device to your EloView account, go to the EloView web portal at
manage.eloview.com. After logging in, go to the 'Devices' page, then click the
'add device' button. Enter the device serial number and a name for the device.
Click 'done'. Your device is now linked to your EloView account and will play
the assigned content in safe kiosk mode. You can also pre-set your devices in
your account. Visit www.eloview.com for details.