Heartland DT10 Hardware Manual page 4

Cautions regarding power
Never connect/disconnect the power plug while hands are wet to prevent the risk of electric
shock.
Never use an unlabeled power plug (other than 100 - 240V AC) and never use octopus tentacle
power wire.
Never use a broken AC wire to prevent electric shock and fire.
Obey the following rules when using an AC wire:
Caution
Handle AC plugs carefully to prevent fire:
Unplug AC plug while holding it firmly.
Never unplug by pulling the AC wire to prevent the risk of fire and electric shock.
Clean the AC plug regularly.
If not using DynamicTracer for an extended period, unplug the AC plug for safety.
Cautions when using
Never use if you notice any strange condition (smoke, strange smell, strange sound, etc...).
Stop using DynamicTracer if is contaminated with water or any foreign body.
Do not decompose/custom DynamicTracer.
Never place any heavy object on DynamicTracer.
Connect DynamicTracer to a PC by a cable connector ensuring the cable is in the correct
Caution
direction.
When moving DynamicTracer, switch the power off, unplug the AC cable for safety and ensure all
cables/connectors are disconnected.
Copyright © 2012 -2014 Heartland. Data Inc.
Never modify the AC wire.
・
Never expose the AC wire to strain.
・
Never bend, twist and pull hard.
・
Never place near heat equipment.
・
・ Never plug in a dusty AC plug.
・ Plug in the AC plug firmly.
DT10 Hardware Manual