Heartland DT10 Hardware Manual page 3

To use this product safely, please read this manual before using.
・
Caution on installation
Install DynamicTracer in a horizontal and stable place.
Install DynamicTracer in a well-ventilated place.
Where the risk of static electricity is high, use the antistatic mat to protect DynamicTracer.
Install DynamicTracer in a wide and flat space. The bottom rubber must be in contact with the
ground.
Never install DynamicTracer near any volatile substances or fire.
Never install / store in the following places:
・ An unstable place
・ A place within children's reach
Caution
・ A place exposed to any other mechanical vibration.
Never install in any of the following places to protect DynamicTracer against fire, electric shock,
malfunction, and other troubles:
・ A humid/dusty place
・ A wet place
・ A place exposed to direct sunlight
・ A place subject to considerable fluctuations in temperature and humidity
・ A place near HVAC equipment.
Copyright © 2012 -2014 Heartland. Data Inc.
Product precautions
DT10 Hardware Manual