Download Print this page

Yale SL7100 Series Installation Instructions

Digital lock set

Advertisement

Quick Links

Digital Lock Set
SL7100 Series
Digital Lock Set - Holdback Function
* To activate Holdback function. Pull inside handle down to 6 o'clock position to completely withdraw the latch bolt.
* Hold the handle in this position and slide snib as shown to retain handle and set Holdback function.
hand. Night latch function is working now.
SNIB
NORMAL FUNCTION
HANDLE
ROTATION
Digital Lock Set-Changing the Code Number
1) The digital lock is supplied with factory set codes:C13579
2) Depress the code select button and slide the selector
from "NON CODE" to "CODE" position and the active
number is selected as shown by the RED indicator.
3) Any numbers not required to be part of the active
code should have the code selectors parked in the
"NON CODE" position.
4) The "CLEAR" button MUST always be used as the
first digit of a code.
5) For best security the code number selected should
code
contain 4 or 5 digits
select
6) Check that the new code works before installation.
buttons
NOTE: THE CODE MAY BE ENTERED IN
ANY SEQUENCE, I.E. C13579 MAY BE
ENTERED AS C19735 OR ANY OTHER
SEQUENCE OF THOSE NUMBERS.
SNIB
NORMAL FUNCTION
HANDLE
ROTATION
Digital Lock Set
SL7100 Series
Components
4
2
5
1. Digital Exterior Code pad assembly
6. 60 mm Latch assembly
2. Digital Interior handle assembly
7. Latch Assembly support post
3. Hex Screw Post 25mm x 2
8. Spindle x 3
4. Neoprene seals x 2
9. Strike plate
5. All fixings - 4 code pad fixing screws,
10. Strike box
4 latch & strike screws
11. Allen key
Installation Instructions
SPECIAL NOTES:
Before commencing installation check that all parts
are working correctly.
* Digital Exterior and Interior Code Pad Assembly:Enter
the factory set code C13579, handle in both directions.
The handle should turn and return freely under
it's own return spring.
* Digital Deadlatch Assembly:Check that spring latch
and spindle hub move freely.
If you need to change the code you should change it now
and test before fitting. - see the Code Change instructions
NOTE: FACTORY HANDING - ALL LOCKSET
ARE SET TO SUIT RIGHT HAND DOORS
1
3
4
7
8
11
5
9
6
12. Instructions and template
1) Check the Handing of Your Door
( LH )
( RH )
( LH )
Left Hand
Right Hand
Right Hand
Left Hand
OUTSIDE
OUTSIDE
Viewed from the outside, your door is right handed it the hinges
are the hinges are on the right.
10
( RH )

Advertisement

loading

Summary of Contents for Yale SL7100 Series

  • Page 1 Digital Lock Set Digital Lock Set SL7100 Series SL7100 Series Components Digital Lock Set - Holdback Function * To activate Holdback function. Pull inside handle down to 6 o'clock position to completely withdraw the latch bolt. * Hold the handle in this position and slide snib as shown to retain handle and set Holdback function.
  • Page 2 Digital Lock Set Digital Lock Set Installation Instructions Installation Instructions 2) Apply the Template 7) Mounting the Lock Select the desired position on the door. Fold the template on the dotted 60mm Select the fixing screws to suit the door thinkness. backset line to suit the deadlatch assembly supplied.Tape the template to the door.