Shock Sensor Alarm - ElectroFlip iTrack 2.0 User Manual

SHOCK SENSOR ALARM

By default, this alarm is disabled. This alarm when activated will send text message/SMS to the
authorized phone numbers for each movement shock event that is triggered. It will not continue sending
alarms unless it is shocked again. To activate this alarm, send a text message containing:
Message Format: shock+password
Text Message: shock123456
Reply: shock is activated
When the tracker is shocked, it will send an SMS alert to the authorized phone numbers with the
following details "Sensor alarm+Geo-info".
To deactivate this alarm, send text message containing:
Message Format: noshock+password
Text Message: noshock123456
NOTE: Shock sensor detects vibration once in every 3 minutes. It will start to detect the second shock 3
minutes after the first alarm.
Shock Sensor Sensitivity Configuration
The sensitivity of the built-in shock sensor has three different level and they are as follows:
 First Level: Alarm will be triggered after the device detects slight vibration. To activate, send
text message containing:
Message Format: sensitivity+password+space+1
Text Message: sensitivity123456 1
 Second Level: Alarm will be triggered after the device detects vibration 8 times in 2 seconds. To
activate, send text message containing:
Message Format: sensitivity+password+space+2
Text Message: sensitivity123456 2
 Third Level: Alarm will be triggered after the device detects vibration 25 times in 5 seconds. To
activate, send text message containing:
Message Format: sensitivity+password+space+3
Text Message: sensitivity123456 3
This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
19