Data Loading (Gprs Mode Only); Hardware Reset; Sleep Mode - ElectroFlip iTrack 2.0 User Manual

DATA LOADING (GPRS Mode Only)

 Current Data Load
To load current data (location information), send text message containing:
Message Format: load+password
Reply: load ok
load failed. Please check GPRS
 Specified Data Load
Load data to GPRS server upon a specific date you choose. To set, send text message
containing:
Message Format: load+password+space+year month day
Text Message: load123456 20141002 (means load tracing data of October 02, 2014)
Reply: load ok

HARDWARE RESET

To reset the GSM and GPS modules of the device, send a text message containing:
Message Format: reset+password
Text Message: reset123456
Reply: reset ok

SLEEP MODE

The sleep mode can save the device's power and extend its standby time. Make sure that no
alarms/alerts have been configured on the tracker before setting this mode.
 Sleep by Time
When this sleep mode is setup, the tracker will go to sleep if no alarms/alerts have been setup and
no operations in 5 minutes. GPS module shuts off and LED lights turn off. To wake up the
tracker, just call or send a text message to the device. To activate this mode, send a text message
containing:
Message Format: sleep+password+space+time
Text Message: sleep123456 time
Reply: sleep time ok
This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
(if device is working under GPRS mode)
(tracker is not in GPRS mode)
No unauthorized reproduction is allowed.
14